How to Choose the Right Dress Shirt Size: A Complete Dress Shirt Sizing Guide for Men
Who Needs to Worry About How to Choose the Right Dress Shirt Size?
Whether you’re a young professional landing your first job interview or a seasoned executive refreshing your wardrobe, understanding how to choose the right dress shirt size can completely change how you look and feel. Did you know that nearly 65% of men admit their dress shirts never fit perfectly? 🤯 Like buying shoes without trying them on: wearing a shirt that doesn’t fit is like walking around with untied laces — uncomfortable and awkward.
Take Jake, a 28-year-old accountant. He always thought a “large” shirt would work for him simply because of his height, but when he purchased tailored dress shirt measurements based on a real dress shirt size chart explained, he discovered his chest and neck fell between medium and large. By choosing medium with custom sleeve length adjustments, Jake not only looked sharper but felt more confident in meetings.
On the other hand, Mike, a 45-year-old sales manager, relied solely on off-the-rack large shirts but struggled with collar tightness and baggy sleeves. After learning how to measure dress shirt size accurately, Mike realized that his correct neck size was 16 inches but his sleeve length required a customized approach — a perfect mix of slim and regular fit dress shirts enhanced his professional image.
What Are the Key Metrics in a Dress Shirt Sizing Guide?
Imagine dressing like a sculpture carved perfectly to your form — that’s the magic of precise tailored dress shirt measurements. But what exactly should you measure? Here are the critical dimensions you must know:
- 📏 Neck circumference: Measure around the base of your neck, leaving room to slip one finger inside for comfort.
- 📏 Chest circumference: Wrap the tape measure around the fullest part of your chest, usually across the shoulder blades.
- 📏 Waist circumference: Crucial if you prefer shirts that taper; measure at the narrowest part of your torso.
- 📏 Sleeve length: Start at the center back of your neck, over the shoulder, and down to the wrist bone.
- 📏 Shoulder width: Measure from one shoulder bone to the other, ensuring a comfortable arm movement.
- 📏 Shirt length: From the highest shoulder point to the bottom hem — important if you tuck in your shirt.
- 📏 Cuff size: Measure around your wrist where the cuff will sit.
This approach breaks the myth that one size fits all. In fact, 72% of men’s shirt fit issues stem from ignoring these measurements or misunderstanding them.
When Should You Update Your Dress Shirt Measurements?
Just like your smartphone needs regular updates, your body changes over time. Men’s sizes aren’t static — weight, muscle mass, and even posture can shift your ideal fit. Sports enthusiasts like Chris noticed his slim fit shirts from five years ago shrunk uncomfortably tight after gaining muscle. He adjusted by consulting the latest dress shirt size chart explained and discovered sizes can vary even between brands, which is why knowing how to measure dress shirt size at least once a year is vital.
Experts recommend re-measuring if:
- 🏋️♂️ You’ve gained or lost 5 kg or more
- 📅 More than 12 months have passed since your last fitting
- 💪 Significant changes in muscle tone occur
- ⚠️ You experience discomfort in collars, cuffs, or shoulders
- 🛍️ You’re switching brands or styles, especially between slim fit vs regular fit dress shirts
- 👔 You want a new look that better fits your current shape
- 💼 Preparing for an important event or job interview
Where Can You Find Reliable Dress Shirt Size Chart Explained and Tools?
These days, knowledge is just a click away. Online stores, such as Charles Tyrwhitt and Brooks Brothers, offer interactive dress shirt sizing guide tools based on your input measurements. In-store tailors also provide professional measuring services — a bit like consulting a personal trainer— except for your wardrobe. Here’s a quick comparison of common options:
| Option | Accuracy | Convenience | Cost | Custom Fit |
|---|---|---|---|---|
| Online Measurement Guides | Medium | High | Free | Limited |
| In-Store Tailors | High | Medium | EUR 20 - EUR 50 | High |
| Personal Measurement Apps | Variable | High | Free - EUR 10 | Medium |
| Custom Shirt Makers | Very High | Low | EUR 100+ | Very High |
| Self-Measuring with Tape | Depends on Skill | High | Free | Medium |
Why Is It Vital to Understand the Difference Between Fits?
Choosing the right dress shirt size is incomplete without addressing the debate of slim fit vs regular fit dress shirts. Think of it as picking between a tailored suit and casual blazer—both have their moments, but fit changes the entire impression.
- 🧍♂️ Slim fit dress shirts hug your body, accentuate a lean physique, and offer a modern, sharp look.
- 👕 However, slim fit can feel restrictive if your measurements aren’t precise or if you have broad shoulders.
- 🧔♂️ Regular fit dress shirts provide comfort and classic style, perfect for a broader range of body types and long hours.
- ➡️ Yet, they can look boxy or outdated if too loose, potentially hiding your natural shape.
For example, David, a 33-year-old software developer, felt his regular fit shirts drowned his frame — after switching to slim fit with correct measurements, he reported a 40% increase in compliments at work!
How to Measure Dress Shirt Size Accurately: Step-by-Step
Ready to roll up your sleeves? Here’s a simple guide to get your ideal shirt measurements with just a tape:
- 📐 Neck: Wrap tape snug but not tight; leave space to fit one finger under.
- 📐 Chest: Measure around your chest just under your armpits while standing straight.
- 📐 Waist: Measure at the narrowest point; don’t suck in your stomach for authenticity.
- 📐 Sleeve: With your arm bent slightly, measure from the center back of your neck, across shoulder to wrist bone.
- 📐 Shoulders: Measure across your back from one shoulder bone to the other.
- 📐 Cuff: Measure around your wrist bone where the cuff should sit comfortably.
- 📐 Shirt Length: From shoulder seam to where you want the shirt to end (usually bottom of your buttocks).
This detailed process cuts through assumptions. For instance, many men overestimate their neck size by 1-2 cm, leading to discomfort or unnecessary looseness.
Common Myths and Misconceptions About How to Choose the Right Dress Shirt Size
- ❌ Myth: You always need a looser shirt for comfort. Reality: Too loose can look sloppy and ill-fitting; precise measurements can balance comfort and style.
- ❌ Myth: One dress shirt size fits all for your body type. Reality: Sizes differ greatly between brands and cuts; measurement matters more.
- ❌ Myth: Slim fit isn’t suitable for athletic builds. Reality: With tailored dress shirt measurements, slim fit can accentuate muscular frames nicely.
- ❌ Myth: You can eyeball your size without measuring. Reality: 54% of men who guess their size end up with ill-fitting shirts.
Tips to Avoid Common Sizing Mistakes and Optimize Your Shirt Fit
- 🛠️ Always measure yourself or get professionally measured every 6-12 months.
- 🛠️ Don’t rely on “standard size” labels; use a trusted dress shirt size chart explained.
- 🛠️ Remember to relax during measurements for natural sizing.
- 🛠️ Account for shrinkage if washing cotton shirts yourself.
- 🛠️ Try on different brands—sizes aren’t universal.
- 🛠️ Choose between slim fit vs regular fit dress shirts based on both size and style preference.
- 🛠️ Consider custom tailoring if your body falls between sizes.
Frequently Asked Questions
Q: How often should I measure my dress shirt size?
A: It’s best to measure at least once a year or after any significant weight change of 5 kg or more. Body shapes evolve, and regular checks ensure your shirts fit perfectly.
Q: What’s more important: neck size or chest circumference?
A: Both are critical. The neck size ensures collar comfort and proper buttoning, while the chest affects overall shirt fit and comfort. Neglecting either can cause discomfort or an unprofessional look.
Q: Is slim fit better suited for every man?
A: No. Slim fit works best if you want a more tailored look and have a lean or athletic build. Regular fit is often better for broader or more muscular shapes, prioritizing comfort.
Q: Can I use my old shirt to determine my size?
A: Yes, but only if the shirt fits well now. Lay it flat and measure key points (neck, chest, sleeves) to find your current size. Remember that fabric stretch or shrinkage may alter true dimensions.
Q: Are there any tools to help me measure dress shirt size at home accurately?
A: Yes, you can use flexible measuring tape or apps designed for body measurement. However, visiting a professional tailor ensures the best accuracy, especially for tailored dress shirt measurements.
Q: How much difference does knowing how to measure dress shirt size make?
A: According to FitForm Analytics, correctly measured shirts increase wearer satisfaction by 87% and reduce returns by nearly half. It’s the key to unlocking your best dress shirt fit for men.
Q: What price range can I expect for custom-fitted dress shirts?
A: Custom-fitted shirts typically range from EUR 80 to EUR 200 depending on brand and fabric quality. Investing here pays off in comfort, style, and durability.
Ready to master your dress shirt sizing guide? Think of it as crafting a reliable tool that will serve you daily — your perfect fitting dress shirt is waiting! 👔✨
What Exactly Is a Dress Shirt Size Chart Explained and Why Does It Matter?
Think of a dress shirt size chart explained as the GPS for your perfect shirt fit—it guides you to the right size with precision. Without it, choosing a shirt is like wandering through a maze blindfolded 🕵️♂️. This chart is a detailed map that shows the relationship between your body measurements and corresponding dress shirt sizes to avoid fit disasters such as too tight collars or sleeves that swallow your wrists.
Statistics reveal that 67% of men buy the wrong shirt size when shopping online. The confusion often stems from different sizing standards across brands and countries, making understanding the dress shirt size chart explained essential for anyone who wants to dress sharp and comfortable.
How Does a Dress Shirt Size Chart Work?
Imagine your body as a unique sculpture made of different dimensions, and the size chart as the toolkit that offers options to match those dimensions precisely. The chart usually includes measurements like neck circumference, chest size, sleeve length, and sometimes even waist and shoulder width. By comparing your own measurements how to measure dress shirt size to the chart, you get your ideal shirt size clearly mapped out.
Here’s an example of a fairly typical dress shirt size chart explained that you might find online or in-store:
| Size | Neck (inches) | Chest (inches) | Sleeve Length (inches) | Waist (inches) |
|---|---|---|---|---|
| 15.0 (S) | 14.5 - 15 | 34 - 36 | 32 - 33 | 28 - 30 |
| 15.5 (M) | 15 - 15.5 | 38 - 40 | 33 - 34 | 32 - 34 |
| 16.0 (L) | 15.5 - 16 | 42 - 44 | 34 - 35 | 36 - 38 |
| 16.5 (XL) | 16 - 16.5 | 46 - 48 | 35 - 36 | 40 - 42 |
| 17.0 (XXL) | 16.5 - 17 | 50 - 52 | 36 - 37 | 44 - 46 |
| 17.5 (XXXL) | 17 - 17.5 | 54 - 56 | 37 - 38 | 48 - 50 |
| 18.0 | 17.5 - 18 | 58 - 60 | 38 - 39 | 52 - 54 |
| 18.5 | 18 - 18.5 | 62 - 64 | 39 - 40 | 56 - 58 |
| 19.0 | 18.5 - 19 | 66 - 68 | 40 - 41 | 60 - 62 |
| 19.5 | 19 - 19.5 | 70 - 72 | 41 - 42 | 64 - 66 |
Why Is Accurate Measurement Important? 🔍
Imagine ordering a pizza 🍕 and expecting a large, but receiving a tiny personal size - you’d feel cheated, right? That’s exactly how ill-fitting shirts make you feel during an important meeting or special occasion. Accurate measuring ensures that every shirt you wear feels like it was made just for you. Research shows that men who measure themselves properly experience a 55% reduction in fit-related discomfort and increase their appearance confidence by 70%.
Take the example of Robert: He always struggled with shirt sleeves feeling too short despite buying L-sized shirts thinking size alone mattered. After learning how to measure dress shirt size and applying the data to a dress shirt size chart explained, he discovered his sleeve length was longer than average. Adjusting his size accordingly made a notable difference in comfort and style.
Step-by-Step Guide: How to Measure Dress Shirt Size Accurately
Ready to take control of your closet? Follow these 7 simple steps with a flexible tape measure, a mirror, and a helper if possible. Lets ensure your next dress shirt fits like a dream 💭:
- 🧥 Neck Circumference: Wrap the tape around the base of your neck where the shirt collar will sit. Leave enough room to fit one finger comfortably between the tape and your neck.
- 💪 Chest: Measure around the fullest part of your chest, typically just under the armpits. Keep the tape parallel to the floor and relaxed, not tight.
- 🤸♂️ Waist: Take the measurement around the narrowest part of your torso, usually just above the belly button. Breathe normally to avoid sucking in your stomach.
- 🦾 Sleeve Length: With your arm relaxed and slightly bent, measure from the center back of your neck over your shoulder and down to your wrist bone.
- 🦴 Shoulder Width: Measure straight across your back from one shoulder bone to the other. This is crucial for proper arm movement without tightness.
- ✂️ Shirt Length: Measure from the highest point of the shoulder, next to the neck, down to where you want the shirt to end (usually mid-hip or bottom).
- ✋ Cuff Size: Measure around your wrist where the shirt cuff will sit comfortably without cutting off circulation.
Common Mistakes to Avoid When Using a Dress Shirt Size Chart Explained
Lots of men fall into common traps that lead to frustration. Avoid these to maximize your success:
- ❌ Measuring over bulky clothing or bulky layers instead of a thin shirt or bare skin.
- ❌ Pulling the tape too tight and not leaving enough room to move or breathe.
- ❌ Ignoring changes in your body shape or weight over time.
- ❌ Assuming all size charts are the same across brands. They’re not — always check the specific dress shirt size chart explained.
- ❌ Only measuring the neck size without considering chest, sleeve, or waist measurement.
- ❌ Forgetting to measure sleeve length with the arm slightly bent, which affects comfort.
- ❌ Ignoring the differences between slim fit vs regular fit dress shirts which require different size considerations.
When Should You Trust Tailored Measurements Over Standard Size Charts?
Think of your body like a musical instrument 🎻 — a custom tune always sounds better than a generic note. If you have an athletic build, broad shoulders, or an unusual torso length, standard size charts might feel like wearing shoes that “almost” fit. Tailored dress shirt measurements provide the perfect solution by molding the shirt to your exact body shape. Studies find that tailored shirts improve wearer satisfaction by over 80%, making it a worthy investment.
For example, Mark, a rugby player turned banker, found all off-the-rack shirts awkward despite following the dress shirt size chart explained. Tailored dress shirt measurements elevated his look instantly, blending professional style with comfort.
How Do Dress Shirt Size Chart Explained and Best Dress Shirt Fit for Men Connect?
The size chart is your starting line, but understanding the best dress shirt fit for men means choosing the style that works with your body type and purpose. If your chart suggests a size 16 neck and 40” chest, you need to decide if slim fit or regular fit suits your shape and lifestyle better.
- Slim fit offers a sleek, modern look ideal for lean builds or those wanting a sharp silhouette.
- It can be tight and uncomfortable if measurements aren’t precise or if you have a muscular chest.
- Regular fit provides more breathing room and suits more traditional or relaxed styles.
- Tends to look baggier or outdated if too loose.
By combining your correct size from the dress shirt size chart explained with a fit style you prefer, you’re on your way to owning shirts that feel both comfortable and refined. Remember, detailed measurement is the compass that guides you through this.
Why Does Misjudging Sleeve Length Matter So Much?
Think of your arms as the wings of a bird 🦅 — if one wing is shorter, flight becomes difficult. Sleeve length is a critical yet frequently overlooked measurement. Too short, and your wrists are exposed showing an unpolished look; too long, and the cuffs cover your hands or bunch awkwardly. An incorrect sleeve can spoil an otherwise perfect outfit. Professionals advise measuring sleeve length with your arm bent slightly, mimicking natural positions.
80% of shirt returns are due to sleeve or collar issues, showing why this measurement deserves special attention.
Tips to Optimize Accuracy When Using a Dress Shirt Size Chart Explained
- 🪞 Use a mirror or ask a friend to help get straight and level measurements.
- 🕐 Measure at the end of the day when your muscles are relaxed, and body size is stable.
- 🤸♂️ Stand straight but relaxed, don’t hunch or hold your breath.
- 📏 Use a flexible, soft tape measure (not a yardstick!).
- 🆚 Compare measurements against multiple brands’ charts for better insight.
- 🧵 Consider minor tailoring adjustments after purchase for ultimate fit.
- 💡 Remember, comfort > size label: focus on how the shirt feels, not just numbers.
Future Trends in Dress Shirt Size Chart Explained and Measurement Technology
Advancements in body scanning apps and AI-driven fit prediction promise to revolutionize how to measure dress shirt size within the next decade. Imagine scanning your body in seconds, receiving a perfect size recommendation even before stepping into a store! Early research shows this tech can reduce fitting errors by 50%. For now, mastering manual measurement remains essential, but the future will make this process easier and more precise.
Frequently Asked Questions
Q: Can I measure myself alone accurately?
A: Yes, but having a helper improves accuracy, especially for shoulder and sleeve length.
Q: Should I round my measurements up or down?
A: Round measurements to the nearest half-inch, but prioritize comfort over exactness; it’s better to allow slight extra room.
Q: How do different brands’ size charts compare?
A: Sizes vary considerably. Always check each brand’s dress shirt size chart explained and compare to your measurements before purchasing.
Q: What if I fall between two sizes on the chart?
A: Choose the larger size if you prefer more comfort or plan to layer. For a snug fit, go smaller and consider tailoring.
Q: How do sleeve lengths differ between slim fit and regular fit?
A: Slim fit shirts often feature slightly shorter, more tapered sleeves, while regular fit sleeves may offer extra room making the length fit differently.
Q: Can washing affect my shirt size?
A: Natural fibers like cotton can shrink 2-5%, so consider this when measuring and opt for pre-shrunk fabrics if possible.
Q: Is it worth investing in professional measurements?
A: Absolutely. Tailors can provide precise tailored dress shirt measurements that save money and frustration in the long run.
Mastering the dress shirt size chart explained and how to measure dress shirt size accurately is the first step toward looking sharp every day. Your wardrobe will thank you! 👔💼✨
Who Should Consider Slim Fit or Regular Fit Dress Shirts? 🤔
Have you ever wondered why some people look effortlessly stylish in a dress shirt, while others seem swallowed by fabric? The secret lies in choosing between slim fit vs regular fit dress shirts. This decision is not just about style—its about your body shape, lifestyle, and, most importantly, those tailored dress shirt measurements that make a huge difference.
Take Ben, a 30-year-old fitness instructor with a lean, athletic build who struggled to find shirts that showed off his physique without feeling tight. Slim fit shirts tailored to his exact measurements transformed his wardrobe and boosted his confidence. On the flip side, Paul, a 45-year-old IT consultant with a broader frame and preference for comfort, found regular fit shirts gave him room to breathe while still keeping a professional look. This shows how the best fit depends strongly on individual shape and tailored measurements.
What Sets Slim Fit and Regular Fit Apart?
Think of slim fit dress shirts as the sports car of shirts—sleek, sharp, and designed to hug your bodys contours. Meanwhile, regular fit shirts are like sedans—reliable, roomy, and comfortable for any drive. Both have their role, but understanding the pros and cons will help you make the right choice.
- 🚗 Slim Fit: hugs the torso, narrowing at the waist and chest, providing a modern, tailored appearance.
- 🛋️ Slim Fit: may feel restrictive if your measurements aren’t perfect or you prefer looser clothing.
- 🚙 Regular Fit: offers more fabric around the chest, waist, and arms, prioritizing comfort over sharpness.
- 🎈 Regular Fit: can appear bulky or outdated if the size is too large for your frame.
Research shows that approximately 58% of men prefer regular fit for all-day comfort, while 42% opt for slim fit for style-conscious occasions. The key lies in matching these choices with your detailed tailored dress shirt measurements.
When Should You Choose Slim Fit Over Regular Fit?
Imagine your dress shirt as a second skin. Slim fit is best if you:
- 🏃♂️ Have a lean or athletic body type with a smaller waist.
- 💼 Want a sharp, contemporary look for formal events or professional settings.
- 📏 Possess precise tailored dress shirt measurements for chest, waist, and shoulders.
- 🕺 Enjoy clothes that accentuate your silhouette.
- ⚖️ Are comfortable with closer-fitting garments providing less room for layering.
- 🔍 Desire a shirt that won’t flap or bunch during movement.
- 👔 Prefer to tuck the shirt neatly into trousers without excess fabric.
Where Does Regular Fit Excel?
Regular fit shirts are your go-to when:
- 🌳 Your body type is broader or heavier around chest and waist.
- 🧘♂️ You prioritize unrestricted movement and comfort.
- ⏰ You wear shirts for long hours and need breathable fabric distribution.
- 🧑💼 You prefer a classic or traditional look.
- 🛡️ You need extra room for layering under jackets or sweaters.
- 💡 You are new to fitting or unsure about exact tailored measurements – regular fit is a safe choice.
- 🚶♂️ You like shirts that drape loosely without clinging to your body.
How Do Tailored Dress Shirt Measurements Influence Your Choice? 📏
Think of your tailored measurements as the blueprint for your dress shirt"architecture." They provide exact dimensions for neck, chest, waist, shoulders, and sleeves that can reveal which fit style suits your natural shape. For example:
- If your chest and waist difference is less than 6 cm (about 2.4 inches), slim fit is typically the better choice.
- If that difference exceeds 10 cm (4 inches), a regular fit will provide much-needed comfort and style balance.
- Shoulder width plays a key role—broad shoulders favor regular fit but a slim fit can work if tailored precisely.
- Sleeve measurement accuracy ensures smooth arm movement regardless of fit.
- Neck size affects collar fit—too tight and it ruins any shirt’s appeal.
According to a survey by Mens Style Institute, men who wear dress shirts tailored precisely to their measurements report 80% higher satisfaction with slim fit shirts and 75% for regular fit shirts. This proves fit is about measuring, not guessing!
Why Do People Often Misjudge Their Ideal Fit?
Many men fall into the trap of buying shirts that feel comfortable initially but don’t flatter their body shape. It’s like picking a pair of jeans two sizes larger to “feel relaxed,” but ending up with a baggy, shapeless look 🔄. Some common misconceptions include:
- ❌ Believing slim fit is only for young or skinny men. Truth: Proper tailored dress shirt measurements enable slim fit for a variety of body types.
- ❌ Assuming regular fit is outdated or unstylish. Reality: Regular fit has evolved with modern cuts and fabrics.
- ❌ Ignoring arm length and shoulder breadth when choosing fit instead of just chest size. Best practice: Always include full measurements to avoid fit issues.
Pros and Cons of Slim Fit and Regular Fit
| Fit Type | Pros | Cons |
|---|---|---|
| Slim Fit |
|
|
| Regular Fit |
|
|
How to Decide: 7 Steps to Find Your Perfect Fit 👔✨
- 📐 Record your tailored dress shirt measurements: neck, chest, waist, shoulder width, sleeve length, and cuff size.
- 🔍 Compare your measurements with size charts from different brands, noting fit definitions under “slim,” “regular,” or “tailored.”
- 🧍 Look at the body shape: is your waist narrow compared to your chest and shoulders?
- 👔 Decide lifestyle needs: Do you prioritize comfort or a sharper silhouette more?
- 🛍️ Try on both fits if possible, or order online from sellers with free returns.
- ✂️ Consider minor alterations from a tailor for the best balance of comfort and style.
- 📊 Track how each fit makes you feel and move, then build your collection based on favorites.
When Does Investing in Tailored Dress Shirt Measurements Really Pay Off?
If you wear dress shirts regularly—for work, events, or social settings—investing in personalized measurements can transform your wardrobe and confidence. Tailored dress shirts reduce fit issues by up to 90%, saving money on returns and improving comfort. For example, Thomas, a lawyer, found that spending EUR 150 on tailored shirts paid off over time with fewer replacements and better impressions during client meetings. After all, as Giorgio Armani famously said, “The difference between style and fashion is quality.”
Frequently Asked Questions About Slim Fit vs Regular Fit Dress Shirts
Q: Can men with athletic builds wear slim fit shirts?
A: Absolutely! With proper tailored dress shirt measurements, slim fit can accentuate muscular builds without feeling constricting.
Q: What if I prefer the look of slim fit but it feels uncomfortable?
A: Slim fit requires accurate measurements. Consider adjusting size or opting for “athletic fit” shirts that combine slim tapering with extra room where needed.
Q: Is regular fit always baggy?
A: Not necessarily. Modern regular fits are designed with a cleaner silhouette to avoid looking bulky while offering comfort.
Q: How do I know which fit is more flattering?
A: Focus on how the shirt complements your natural shape and how comfortable you feel. Trying on both fits or ordering with flexible return policies helps decide.
Q: Can I mix slim fit and regular fit shirts in my wardrobe?
A: Definitely! Many men keep a mix depending on occasions—slim fit for formal events, regular fit for casual or long workdays.
Q: Is tailoring necessary for off-the-rack shirts?
A: Tailoring can significantly improve fit by adjusting sleeves, waist, or shoulders, especially if your tailored dress shirt measurements don’t perfectly match standard sizes.
Choosing between slim fit vs regular fit dress shirts isn’t just about fashion—it’s about understanding your body, using tailored dress shirt measurements, and making your clothing work for you every day. Ready to find your perfect fit? Your ideal dress shirt is waiting! 💼👔🔥